MakerBot Replicator 2X User Manual page 90

CUSTOMIZING A THING
90
CONTINUED
SAVING AND DOWNLOADING
YOUR CUSTOMIZATIONS
After you change one or more parameters
for a customizable thing, you can save your
Fig. 13. 2
customizations and download the file for
printing. To do this:
1. In the Customizer page, click the Create
Thing button.
2. The Creating Your Customized STL
dialog box appears. You can enter values
in the following fields:
Name: Name of the file for the customized thing.
Publish New Thing: Select this checkbox to
publish the STL file to Thingiverse.
Email me when it's done: If you select this
checkbox, Thingiverse will send you an email
when your STL file has been created.
Create Thing: Click this button to generate
the STL file.
3. The Creating your Customized STL dialog
box will display a message telling you that it
is generating your file. Click the link Go to my
Queue to see the status of the file. [Fig. 13.2]
4. When your file appears in the queue
with the status Done!, click the View Thing
button. Unless you had Publish New Thing
checked, the Thing page will be private.
5. In the Thing page for your new file, click
the Download This Thing button.
6. In the Downloads dialog box, select the
appropriate file to download
7. You can save the file to your local computer
or open the file with MakerWare and print it.