MakerBot Replicator 2X User Manual page 55

TROUBLESHOOTING
MakerWare cannot detect my MakerBot
Replicator 2X
When MakerWare cannot connect to the
MakerBot Replicator 2X, that usually means
you have to restart Conveyor. Conveyor is
a background service that runs as part of
MakerWare and manages the connection to
your MakerBot Replicator 2X.
To restart Conveyor:
1. Go the Services menu.
2. Choose Restart Background Service.
3. If Conveyor was the cause of the problem,
you should now see the Replicator 2X icon at
the lower right of the MakerWare window.
MAKERWARE 55