MakerBot Replicator 2X User Manual page 66

PRINTING WITH BOTH EXTRUDERS
66
10. Click on the point of an outer petal from
the first layer to highlight that object.
11. Click twice on the Object button.
12. In the Object Information submenu, in
the Extruder field, select an extruder to
print
13. Click on the point of an outer petal from
the second layer to highlight that object.
14. Click twice on the Object button.
15. In the Object Information submenu,
in the Extruder field, select an extruder
to print
16. To keep the two STL files linked together
and assigned to extruders, save the
Fig. 9.4
object as a .thing file. To do this:
• In the File menu, choose Save As.
• Save the file as a .thing file.
17. Choose the File menu and choose Make
It or click the Make button.
18. In the Make dialog box, select the Export
to a File radio button.
19. In the Make dialog box, click the Export!
button. Save your STL file to an SD card.
CONTINUED
. [Fig. 9.4]
Lotus_color1.stl
.
Lotus_color2.stl