Lcd Panel | Info And Settings Menu - MakerBot Replicator 2x User Manual

DiAgNOSTiCS
iNFO AND SETTiNgS
Bot Statistics
general Settings

LCD PANEL | INFO AND SETTINGS MENU

Displays the estimated total hours and minutes of
building in the lifetime of your MakerBot Replicator 2X
and the duration in hours and minutes of the last build.
Optional settings and information.
SOUND: Turns the MakerBot Replicator 2X's indicator sounds
on and off.
LED COLOr: Allows you to turn off the LED lights or select a
color. Choices are Blue, Green, Pink, Orange, Purple and White.
ACCELErATE: Allows you to turn acceleration on and off.
Acceleration allows your MakerBot Replicator 2X to operate
more smoothly, and is turned on by default. Note that with
acceleration turned off, you should not use printing speeds
faster than 45 mm/s.
hEAT hOLD: Specifies a time period for your heated build
plate and extruders to continue heating when a 3D print
is canceled.
hELP TEXT: Specifies whether you want verbose help text
[On] or abbreviated help text [Off].
hEAT LEDs: Changes LED colors when the MakerBot
Replicator 2X is heating. When this option is set to On,
the LED color will change from blue to red during the
heating process and return to the default color when
the heating process is complete.
TOOL COUNT: Specifies whether your MakerBot has one
extruder or two. The MakerBot Replicator 2X has two extruders.
hEATED PLATE: Specifies whether your MakerBot has
a heated build plate. The MakerBot Replicator 2X has a
heated build plate.
E TROUBLESHOOTING, DIAGNOSTICS, AND MAINTENANCE
53