Lcd Keypad - MakerBot Replicator 2X User Manual

START UP
THE LCD KEYPAD
The left arrow
often allows you
to go back or
cancel an action.
NOTE: If you don't see the Startup Script, use the up and down arrow buttons to scroll through the top level
menu on the LCD panel and use the M button to select Utilities. Scroll to Run Startup Script and select it.
You can use these menus to return to the Startup Script at any time. You can view videos of the startup
process on the MakerBot Replicator 2X video page at makerbot.com/support/replicator2x/videos. If you
have any problems or questions, refer to the included Troubleshooting and Maintenance Guide or contact
MakerBot Support by emailing support@makerbot.com.
• A solid red M means
the MakerBot Replicator 2X
is working.
• A blinking red M means the
MakerBot Replicator 2X is
waiting for user input.
Four arrow buttons
surround a central M
button. Use the arrows to
navigate through the LCD
menus and the M button
to make selections.
21