Din-Rail Mounting Option - GarrettCom Magnum CS14 Series Installation And User Manual

CS14, CSN14 Series Converter Switches
Metal mounting screws in the bottom-front hold each of the media converters
securing them in the tray and enabling separate removal for service. The dual LEDs permit
viewing of Switch status from any angle.

3.4 DIN-Rail mounting option

The Magnum CS14HR, CSN14HR
and CS14PR, CSN14PR Converter Switches,
designed for use in "Factory Floor" Industrial
Ethernet environments, are also available for
DIN-Rail mounting in an enclosure having DIN
Rails.
A Magnum CS14H is shown
alongside the DIN-Rail-MC2 bracket
The metal DIN-Rail mounting hardware is optional and needs to be ordered as a
separate item, e.g. Model #DIN-RAIL-MC2.
It comes with four screws to attach the bracket to the MC unit. The rail clip is
spring-loaded with a pull-up latch at the top for easy "snap-on" attachment and removal.
www GarrettCom com . .
Installation and User Guide (02/06)
43