GarrettCom Magnum CS14 Series Installation And User Manual page 57

CS14, CSN14 Series Converter Switches
fiber port 10BASE-FL or 100BASE-FX multi-mode, 50/125 or 62.5/125 microns cabling
can be used, whereas for single-mode, 9/125 microns cabling should be used. Fiber cabling
supports much longer cable distance and higher bandwidths as compared to copper wiring.
Media
Twisted Pair (CAT 3 or 5)
Twisted Pair (CAT 5)
Fiber (Multi-mode, Single -mode)
Fiber (Multi-mode)
Fiber (Single-mode)
Fiber (Multi-mode)
NOTE : It is recommended that high quality CAT. 5 cables (which work for both 10 Mbps
and 100Mbps) be used whenever possible in order to provide flexibility in a
mixed-speed network, since P80-series switch ports are auto-sensing for either 10
and 100Mbps. Note that the auto-cross function does not operate, if the port is
fixed or not supporting auto-negotiation.
www GarrettCom com . .
Installation and User Guide (02/06)
IEEE Standard
10BASE-T
100BASE-TX
10BASE-FL
100BASE-FX
100BASE-FX
100BASE-FX
50
Connector
RJ-45
RJ-45
ST
ST, SC
SC, LC
MTRJ