Mounting And Dismounting The Fs-T1001; Mounting On A Camera - Focus FS-T1001 User Manual

Quick Start

Mounting and Dismounting the FS-T1001

For a complete list of cameras compatible with the FS-T1001, visit the
FS-T1001 product page at www.focusinfo.com.
FS-T1001 is designed to mount to cameras that have an HD-SDI output,
V-lock battery plate, and a Sony accessory dock mount.

Mounting on a Camera

5
To mount FS-T1001 to a camera:
Make certain that both the camera and FS-T1001 are
1.
powered off.
Disconnect the power cable to the camera.
2.
Set the camera on a sturdy surface.
3.
Orientate the FS-T1001 front side (OLED display side)
4.
with the inner side of the camera: typically this is the
side with the viewfinder and controls.
Slide the FS-T1001 into the V-lock mount on the
5.
camera.
The dock mount arm on FS-T1001 should align with
camera's dock mount. The FS-T1001 locks into the
V-lock plate.
Once inserted, tighten the two docking thumbscrews on
6.
the accessory dock. Be careful not to over tighten.
Attach a V-lock battery to the rear of FS-T1001.
7.
The battery locks into place.
6 - FS-T1001 Media Recorder
V-lock Release Levers
6
7