Powering The Fs-C; Connecting The Fs-C To Ac Power - Focus FS-C User Manual

Quickstart

Powering the FS-C

• The FS-C operation without a battery installed.
To operate the FS-C without a battery installed, connect
the unit to an AC power source.
• Before operating the FS-C with battery power.
It is first necessary to fully charge the battery. An
uncharged battery, typically takes 2-3 hours to charge.

Connecting the FS-C to AC Power

Attach the AC power cord to the FS-C (with or without battery
installed). The FS-C is immediately ready for operation.
To do this, connect the AC power as follows:
Battery Pack
1. Plug the cord from the power supply into the bottom of the
FS-C.
2. Connect the line cord to the rectangular power supply.
3. Plug the line cord into an electric outlet.
20
DC Cable
DC Power Port
FS-C Portable DTE Recorder