Turning Off The Projector - Christie LX700 User Manual

Turning Off the Projector

Press the ON/STAND-BY button on the side control
1
or the STAND-BY button on the remote control, and
"Power off?" appears on the screen.
Press the ON/STAND-BY button on the side control or
2
the STAND-BY button on the remote control again to
turn off the projector. The LAMP/SHUTTER indicator
lights bright and the POWER indicator turns off. After
the projector is turned off, the cooling fans operate for
90 seconds. You cannot turn on the projector during this
cooling down period.
When the projector has cooled down enough, the
3
POWER indicator lights green and then you can turn on
the projector. To unplug the AC power cord, wait until
the projector is completely cooled down.
TO MAINTAIN THE LIFE OF THE LAMP , ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF .
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
POWER INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE.
Note:
User's Manual
020-000119-01
"Power off?" disappears after 4 seconds.
Rev. 1 (11/08)
Basic Operation
27