Rear Terminal - Christie LX700 User Manual

Rear Terminal

COMPUTER INPUT TERMINAL (DIGITAL)
Connect the computer output digital signal to this
terminal. The HDTV (HDCP compatible) signal can
also be connected (pp.22-23).
COMPUTER INPUT TERMINAL (ANALOG)
Connect the computer (or RGB scart) output signal
to this terminal (pp.22-23).
5 BNC INPUT JACKS
Connect the component or composite video output
signal from video equipment to VIDEO/Y, Pb/Cb,
and Pr/Cr jacks or connect the computer output
signal (5 BNC Type [Green, Blue, Red, Horiz. Sync,
and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.22-
23).
VIDEO INPUT JACK
Connect the component or the composite video
output signal from video equipment to this jack
(p.23).
R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
User's Manual
020-000119-01
Part Names and Functions
USB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with the supplied USB cable (p.22).
CONTROL PORT CONNECTOR
When controlling the projector from a computer,
connect the computer to this connector with a
control cable (p.22).
AUDIO IN JACK
Connect the audio output (stereo) signal from a
computer or video equipment (p.24).
S-VIDEO INPUT JACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.23).
AUDIO IN JACK
Connect the audio output (stereo) signal from a
computer or video equipment (p.24).
Rev. 1 (11/08)
11