Christie LX700 User Manual page 53

Background
The selected background screen will be displayed when no input
signal is detected.
Blue . . . Blue colored background.
User . . . The image you captured.
Black. . . Black colored background.
Logo
This function allows you to customize the screen logo with Logo
select, Capture, and Logo PIN code lock functions.
Note:
Logo select
This function decides on the starting-up display from among the
following options.
User . . . Show the image you captured.
Default . Show the factory-set logo.
Off . . . . Show the countdown display only.
Capture
This function enables you to capture an image being projected to
use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture the
projected image.
After capturing the projected image, go to the Logo select
function and set it to "User" . Then the captured image will be
displayed the next time you turn on the projector.
To cancel the Capture function, select [No].
Note:
User's Manual
020-000119-01
" "
Rev. 1 (11/08)
Note:
Logo
Set the red frame pointer
to the item and press the
SELECT button.
Select [Yes] to stop
capturing.
Capture
Set the pointer (red
arrow) to the item and
press the SELECT button.
Setting
Select [Yes]
to capture
the projected
image.
53