Sound Adjustment - Christie LX700 User Manual

Sound Adjustment

Direct Operation
Volume
Press the VOLUME+/– buttons on the side control or on the
remote control to adjust the volume of Audio Output. The
volume dialog box appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to temporarily
turn off the AUDIO OUT. To turn the AUDIO OUT back on,
press the MUTE button again or press the VOLUME +/–
buttons.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
frame pointer to the Sound Menu icon.
Use the Point
2
pointer to the desired item, and then press the SELECT
button.
Volume (Audio output)
Press the Point button to turn up the volume; press the
Point button to turn down the volume.
Mute (Audio output)
Press the Point buttons to switch the mute function
On/Off. When the sound is turned off, "On" is displayed.
Press the Point buttons again to turn the sound back
on.
Input pattern
This projector has two INPUT terminals [AUDIO IN
AUDIO IN Input pattern allows you to set up INPUT 1,
INPUT 2, and INPUT 3 to each INPUT for sound function.
(pp. 11, 35-37)
Press the SELECT button to display the input pattern dialog
box. Use the Point
arrow) to the desired pattern and press the SELECT button
to set the input pattern for sound function. Check mark
appears next to the selected Input pattern.
User's Manual
020-000119-01
buttons to move the red
buttons to move the red frame
buttons to move the pointer (red
Side Control
Remote Control
Volume Dialog Box
Press the MUTE button to set the Mute function
On or Off. The dialog box disappears after 4
seconds.
Sound Menu
Exit the Sound Menu.
Input Pattern Dialog Box
Selected Input Pattern
Rev. 1 (11/08)
Basic Operation
VOLUME +/– buttons
VOL – button
VOL + button
MUTE button
Approximate
level of the
volume.
Sound Menu icon
Approximate level of
the volume.
Move the pointer
(red arrow) to the
desired pattern
and press the
SELECT button.
31