Computer Input Source Selection - Christie LX700 User Manual

Input Selection

Computer Input Source Selection

Menu Operation
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press the MENU button to display the On-Screen Menu. Use
1
the Point buttons to move the red frame pointer to the
INPUT Menu icon.
2 Use the Point
to the desired input and then press the SELECT button. The
Source Select Menu appears.
3 Use the Point
then press the SELECT button.
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB (PC digital).
Note:
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting the computer output [5 BNC Type (Green,
Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer
to G, B, R, H/HV, and V jacks:
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.
36
buttons to move the red arrow pointer
buttons to select the desired source and
INPUT MENU
Input 1
INPUT MENU
Input 2
Rev. 1 (11/08)
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
Source Select Menu
Move the pointer (red
arrow) to the desired source
and press the SELECT
button.
INPUT Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
SELECT button.
User's Manual
020-000119-01