Auto Pc Adjustment - Christie LX700 User Manual

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
Menu Operation
Auto PC adj.
Press the MENU button to display the On-Screen Menu. Use
1
the Point buttons to move the red frame pointer to the
PC Adjust Menu icon.
2 Use the Point
to the AUTO PC adj. icon and then press the SELECT button
twice.
To store the adjusted parameters.
The adjusted parameters from the Auto PC Adjustment can be stored in
the projector. Once the parameters are stored, the setting can be done
just by selecting Mode in PC SYSTEM Menu (p.38). See MANUAL PC
ADJUSTMENT on pages 40–41.
Note:
User's Manual
020-000119-01
buttons to move the red frame pointer
Remote Control
PC ADJUST MENU
Rev. 1 (11/08)
Computer Input
AUTO PC button
PC Adjust Menu icon
Move the red frame pointer to the Auto PC
adj. and press the SELECT button twice.
"Please wait... " appears while the Auto PC
adjustment is in process.
39