Removal Procedure
Step
5
Pull the harness
retainer and lift it up to
remove.
Remove the 3 screws
6
from the fixing plate and
remove the fan motor.
52
Procedure
Part A
Part B
Fixing plate
Fan motor
Points
When reassembling, put the
part A first in the groove,
and then slide the part B
along the way.
Be careful not to strain nor
to catch the harness at the
part A.
Harness
retainer
(R14655)
The motor and the harness
are integrated together.
Make sure that the washer
is not left behind the fan.
(R12373)
Photocatalytic Air Purifier L-Series
SiBE811120