Daikin MC70L3VM L-Series Service Manual page 24

SiBE811120
5
Pleated filter
Pleated filter
Face the white
side to the front.
If the filter lamp lights up or blinks
Replace
Replacement
NOTE
• Be careful not to scratch the surface of the front panel or damage the projections on the rear of it after it is removed.
The projections on the rear work as a safety switch that shuts power off when the front panel is opened.
If they are damaged, operation can not start.
Rear of front panel
Projections
Photocatalytic Air Purifier L-Series
6
Deodorising catalyst unit
Deodorising
catalyst unit
Do not rinse
with water.
Vacuum cleaner
Can not be rinsed in water
• Use a vacuum cleaner to remove the dust.
• If the deodorising catalyst unit frame
becomes dirty, wipe off the dirt with a cloth
slightly moistened with water. In the case of
heavy dirt, wipe it off with a cloth moistened
with neutral detergent.
Page 21.
• Do not wash with water. (If the unit is
washed with water, it will be deformed and
become unusable.)
Be careful not to damage
these projections.
Bottom hole
7
Do not rub the
front surface.
If it gets dirty
• If the main unit or the air inlet for the air
quality / odour sensor is clogged with dust,
use a vacuum cleaner to remove the dust.
• For the main unit, wipe off the dirt with a
cloth slightly moistened with water.
WARNING
• Do not touch the inside of the hole at the bottom of the unit.
(Electric shock may occur.)
• Consult your dealer if the unit is damaged and does not
operate.
Operation Manual
Main unit or air inlet
for sensor
Air inlet for odour sensor
Air inlet for
air quality sensor
If it is clogged
Vacuum cleaner
Wipe
16
23