Daikin MC70L3VM L-Series Service Manual page 18

SiBE811120
4
Attach the pleated filter.
Make sure to set the prefilter (green) and the pleated filter
(front: white, rear: blue) in place.
If you operate the unit without them, the unit may be
damaged.
1) Fit the holes (5 each on the right and left) of the pleated
filter to the fixing lugs (5 each on the right and left) of the
deodorising catalyst unit.
Face the white
side to the front.
2) Insert the pleated filter underneath the tabs (4 locations)
at the top and bottom of the deodorising catalyst unit.
Top and bottom
tabs (4 locations)
• Unit performance drops if the pleated filter is attached
backward.
5
Attach the deodorising catalyst unit.
• Holding the deodorising catalyst unit by the handles, fit the
projections into the grooves (4 locations) at the bottom of
the main unit and press the deodorising catalyst unit into
the main unit.
Handles
Deodorising catalyst unit
Photocatalytic Air Purifier L-Series
Projection
(5 each on right and left)
Pleated filter
Holes
(5 each on right and left)
Deodorising catalyst unit
1)
Fit here.
2) Press the deodorising
catalyst unit until you
hear clicking sound.
6
Attach UNIT1.
• Holding UNIT1 by the handles, fit the projections into the
grooves (2 locations) at the bottom of the main unit, and
press UNIT1 into the main unit.
Handles
1)
Fit here.
UNIT1
2) Press UNIT1 until you
hear clicking sound.
7
Attach the front panel.
• Fasten the top hooks (2 locations) of the front panel to the
top grooves (2 locations) of the main unit and then close
the front panel.
Top grooves
(2 locations)
1) Fasten the hooks.
Front panel
[View from above]
If the front panel is improperly set, the safety switch
may be activated. Operation may not start.
Operation Manual
Top hooks
(2 locations)
2) Press the front panel
until you hear clicking
sound.
Page 16.
10
17