Bspatch Messages - Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual

BSPATCH Messages

BSPATCH Messages
This section contains boot loader patch messages.
Error Message BSPATCH-1-RELOAD: System will reboot to activate newly patched Boot
Loader.
Error Message BSPATCH-1-PATCHED: Boot Loader patch ([chars]) installed.
Error Message BSPATCH-3-FAILED: Failed to install Boot Loader patch ([chars]).
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-8
This message means that the switch will automatically reboot after the boot loader is
Explanation
patched.
If this message recurs, copy it exactly as it appears on the console or in the
Recommended Action
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
"Error Message Traceback Reports" section on page
This message means that a boot loader patch is installed successfully. [chars] is the
Explanation
SDRAM refresh timer register setting.
If this message recurs, copy it exactly as it appears on the console or in the
Recommended Action
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
"Error Message Traceback Reports" section on page
This message means that the switch failed to apply a boot loader patch. [chars] is the
Explanation
SDRAM refresh timer register setting.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-3.
1-3.
1-3.
"Error
OL-9641-04