Section 5I
GPS Settings
Setting the GPS Mode (page 97)
Setting the GPS Fix Rate (page 98)
Using Metric Units (page 98)
Changing Your Mapping Service (page 98)
Performance Setting (GPS) (page 98)
Accuracy (page 99)
Basic GPS settings can be changed in the GPS Information and Settings window. (See "GPS
Information and Settings" on page 46.)
Additional settings are available at
Setting the GPS Mode
GPS mode determines whether the location fix is done:
●
Once ("one-time"), or
●
Periodically ("continuous") — used, for example, for turn-by-turn (TBT) navigation applications.
To set the GPS mode:
1.
Make sure you're logged in to the home page.
2.
Click
Advanced settings > WAN > GPS
3.
Select the
Enable GPS
4.
Select one of the following:
One-time
— A single fix is used. Use this option if you'll be using your device at the same
location.
Tip:
If you want to get a fix immediately, click
Continuous
— Fixes are obtained on a regular basis; also known as auto-tracking. Useful
for turn-by-turn (TBT) navigation applications, such as driving directions.
Advanced settings > WAN > GPS
.
check box if it is not selected.
Get fix now
.
.
Settings
97