Table of Contents
Advertisement
2.
If the LCD is blank, press and hold the power button
Turning Your Device Off
Press and hold the power button
Using the Power Button to Determine the Device State
The power button
on the device also indicates the device's status, as shown in the following table.
Power button
Lit, flashing (approximately
every 4 seconds)
Lit, flashing (approximately
every 8 seconds)
14
Your Device
for 2 seconds.
Description
The device is turned off.
Not lit
The device is turned on, but the LED
is turned off.
The device is turned on, and the LED
is turned on.
The device is in standby (low power)
mode.
The following are off: LCD, Wi-Fi
radio, 3G/4G radios.
(For more information, see "Standby
(Low Power) Mode" on page 49.)
for two seconds.
Your action
To turn the device on, press
and hold the power button
for two seconds.
Optionally, turn on the LED.
(See "Enabling and Disabling
the Power Button LED" on
page 72).
No action required.
To exit standby mode:
Connect the device to the AC
charger or computer through
the micro-USB cable.
— or —
Press the power button
.
Advertisement
Table of Contents
