Table of Contents
Advertisement
About Panel
To view information about your device:
1.
Log in to the home page.
2.
Click
Advanced settings
3.
Click
Device > About
Note:
4G information is not available if
settings > WAN > Setup
The following information is displayed:
● Model Number
— This is the manufacturer's model of your device.
● Activation Status
— This field reflects whether 3G is activated.
● Manufacturer
— This is the company that made your device.
● Activation Date
— This is the date that the 3G modem was first activated.
● Software Version
— This is the firmware version for the routing hardware of the device.
● Network Operator
— This field shows the carrier that your device was activated with.
● Reconditioned Status
— This field indicates whether your device has been returned for service
or repair and reconditioned (if applicable).
● Wi-Fi Firmware Version
● Reconditioned Date
— This field indicates the date that your device has been reconditioned (if
applicable).
● Router PRI Version
— This is the PRI version for the routing hardware of the device. The PRI
(Product Release Instructions) is a file that contains the settings used to configure wireless
products for a particular service provider, customer, or purpose.
● Total Bytes
— This is the amount of data transferred over the 3G network during the lifetime of
the device.
● MDN
(Mobile Directory Number) — This is a 10-digit phone number.
● ESN
or
MEID
.
The ESN (Electronic Serial Number) is the unique first-generation serial number assigned to the
3G component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number
assigned to the 3G component of the device.
● PRL Version
— The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem. An
updated PRL may improve your 3G network service.
● PRI Version
— This is the PRI version of the 3G component of the device.
● Firmware Version
— This is the firmware version of the 3G component of the device.
(
).
.
WAN mode
is "3G only." (
.)
— This is the firmware version for the Wi-Fi access point of the device.
WAN mode
is in
Advanced
Settings
79
Advertisement
Table of Contents
