Table of Contents
Advertisement
● SD-Card Slot
— Before you can use the microSD Card Slot, you must enable it. (See "Enabling the
microSD Card Slot" on page 55.)
● microSD Shared Folder Name
(in the file browser program). (See "microSD Shared Folder Name" on page 56.)
● Username and Password Security
required to access the microSD Card. (See "Setting Up Access to the microSD Card" on page 55.)
● Guest Username
— This is the username that non-administrators must enter before using the card.
● Guest Password
— This is the password that non-administrators must enter before using the card.
Sounds Panel
From the
panel of the
Sounds
events. To enable or disable sounds:
1.
Log in to the home page.
2.
Click
Advanced settings
3.
Click
Device > Sounds
4.
Next to each of the event types, select
Sounds for the following events can be individually enabled or disabled:
● Low Battery
— A sound is played when the battery is low. This is useful as a reminder to charge the
device. In the
Alert When
● System Alerts
— A sound is played when a system alert occurs. You can then use the device LCD
or the Alerts window to get information about the alert. (See "Alert Information" on page 46.)
Note:
System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Routing hardware settings reset
• Device startup failure
● Internet Connected
● Internet Disconnected
● Wi-Fi User Has Joined
intruder.
● Wi-Fi User Has Left
● Last User Has Left
— A sound is played when the last Wi-Fi user disconnects from your network.
You can turn the device off if nobody will be using it for awhile.
● Enter Standby Mode
(Low Power) Mode" on page 49.
To play the sound for an event, click its
78
Settings
— This is the name of the folder that the microSD card shows up as
— You can specify whether a username and password are
tab, you can enable or disable sounds for specific types of
Device
(
).
.
Enable
list, you can select a battery level to trigger the alert.
— A sound is played when you connect to the Internet.
— A sound is played when you lose the connection to the Internet.
— Useful, for example, if you're the only one using the device, to detect an
— A sound is played when a Wi-Fi user disconnects from your network.
— A sound is played when the device enters standby mode. See "Standby
button.
or
.
Disable
Advertisement
Table of Contents
