Removing A Microsd Card; Accessing The Microsd Card - Sierra Wireless Overdrive Pro User Manual

Removing a microSD Card

1.
Make sure you and other users have completed any file transfers.
2.
In the microSD Card Information and Settings window (page 50), click
and wait until a message is displayed, stating it is safe to remove the card.
3.
Gently open the tab labeled "microSD" on the side of your device.
4.
Using your fingernail or a thin blunt object, gently press the microSD card in and then
release; it should partially pop out of its slot, as shown in the drawing above.
5.
Remove the microSD card and store it in a safe place.
6.
Close the tab over the microSD slot of the device.

Accessing the microSD Card

If the microSD slot is enabled, an inserted card appears in your file browser as a shared network
drive.
The way to access the card varies, depending on your operating system.
Note: In the information that follows,
settings > Wi-Fi > Network
Windows
1.
In Windows Explorer or Internet Explorer, type one of the following:
\\OverdrivePro\
\\<Router IP Address>\
For example, \\192.168.0. 1 \
(For example, \\MyDeviceName\)
\\<Hostname>\
— or —
<Hostname> is the value of the Hostname field (in
Advanced settings > Router > LAN
and also in
(field in
Advanced settings > Router > LAN
Safe-Eject SD Card
Advanced
).
)
Using Your Device 57