Using The Power (I) Key; Disabling Or Modifying Keypad Functions - Intermec CK31 User Manual

Using the Power (I) Key

When you press the I key to turn off the CK31, you actually
put the computer in Suspend mode. In Suspend mode, the
CK31 continues to supply power to all memory, but turns off
power to most hardware. This power-saving feature is designed
to prolong battery life.
When you press the I key to turn the CK31 back on, your
computer resumes where it was when you turned it off. If you
are using WPA or 802.1x security, the computer may need to
reauthenticate before it starts your application.
If the Battery light flashes and your CK31 does not resume after
pressing I, your battery may be too low to supply power.
Replace the battery. If replacing the battery does not solve the
problem, see "Booting the CK31" on page 104.

Disabling or Modifying Keypad Functions

You can disable the functionality of several keys on the keypad if
you want to restrict the ability to perform adjustments made
from the keypad, such as changing the beeper volume.
You can disable these keypad functions:
• Beeper volume
• Task Manager (opened by pressing Alt and then Tab)
Note: When you disable Alt Tab, you also disable Alt Esc.
You can modify this keypad function:
• The behavior of the I key. You can configure the boot
functionality to either warm or cold boot when you press and
hold the I key for five seconds.
To disable keypad functions
1 From the Start menu, tap Intermec Settings. The Intermec
Settings application appears.
2 Tap Device Settings > Keypad. The Keypad menu expands
to show you the options.
CK31 Handheld Computer User's Manual
Chapter 1 — Using the CK31 Handheld Computer
13