Intermec CK31 User Manual page 61

CK31 in a Serial Network.
To use serial communications with your CK31
1 Turn off the CK31.
2 Connect the CK31 to the serial port of another device. You
can do this in one of the following ways:
• Connect the CK31 serial port to a button link or serial
• Connect the AD1 communications dock to the serial port
3 Turn on the CK31.
4 Make sure that your CK31 is talking to the network and that
the network can see your CK31.
CK31 Handheld Computer User's Manual
Host
Ethernet
Serial cable
CK31
printer using the 26-pin to DB9 (9-pin) serial adapter and
a male-to-female null modem RS-232 cable.
of the other device using a DB9 to DB9 serial adapter
cable. Insert the CK31 into the dock.
Chapter 2 — Configuring the CK31
PC
45