Intermec CK31 User Manual page 76

Chapter 2 — Configuring the CK31
To load certificates on the CK31 if you are using Active Directory
1 Configure the network and radio settings for the CK31 to
communicate with your certificate authority or establish an
ActiveSync connection with the CA.
2 From the Configuration Utility, Select Communications >
802.11 Radio > Certificates.
3 Select Enroll Certificates and tap the Run App button. The
Enroll Certificates dialog box appears.
4 In the Enroll Certificates dialog box, enter the User Name,
Password, and Server (IP address) to log into the CA server.
5 Tap OK or press Enter. A dialog box appears asking if you
want to load the root certificate.
6 Press Enter for yes. The Enrollment Tool message box
appears telling you that the user certificate has been added.
7 Press Enter to close the Enrollment Tool message box.
8 Configure your CK31 for WPA, WPA2, or 802.1x security.
60 CK31 Handheld Computer User's Manual