Connecting The Cn50 Using Ethernet Communications - Intermec CN50 User Manual

Chapter 2 — Connecting and Configuring the CN50

Connecting the CN50 Using Ethernet Communications

32
To select the current wireless printer
1 Select Start > Settings > the System tab > Wireless Printing.
2 Tap Search to find a printer, or tap Manual to enter a device
address. Follow the onscreen instructions to select the current
wireless printer.
3 (Optional) Tap Print Test Page. The printer prints out the test
page.
Note: You can also print wirelessly from inside your applications
using Microsoft APIs with Bluetooth extensions for Winsock and
Bluetooth virtual COM ports. For help, see the IDL which is available
from the Intermec web site at www.intermec.com/idl.
You connect your CN50 to your Ethernet network with an ethernet
cable and an AD24 ethernet multidock.
To use your CN50 in an Ethernet network
1 Connect your CN50 to an ethernet network with an AD24.
Ethernet communications is automatically enabled on your CN50.
2 Make sure that your CN50 is communicating with the network.
You should see the network connection icon (
navigation bar.
) in the
CN50 Mobile Computer User's Manual