Aligning The Touch Screen; Rotating The Screen - Intermec CN50 User Manual

Chapter 1 — Using the Computer

Aligning the Touch Screen

Rotating the Screen

14
If the touch screen does not respond when you tap it with the stylus,
you may need to calibrate the screen. Before you calibrate the touch
screen, make sure the CN50 screen is unlocked.
To calibrate the touch screen
1 Tap Start > Settings > the Systems tab > Screen.
Note: If the touch screen is so out of alignment that you cannot
open the Start menu, you can try to align the screen menu using
the keypad. For help, see the next procedure.
2 Tap Align Screen and follow the instructions to align the screen.
3 Click ok.
If you are unable to align the touch screen, you may need to cold boot
the CN50. For help, see
The internal accelerometer enables you to have the screen rotate by
sensing the orientation of the CN50. You can enable the screen to
rotate all the time depending on orientation, you can enable it to
rotate for specific applications, you can disable rotation for selected
applications, or you can disable it.
To configure the screen rotation
1 Tap Start > Settings > the Systems tab > Sensors.
2 Select the option you want to use.
You can modify the screen rotation settings file to determine which
applications will enable or disable screen rotation by modifying the
settings.csv file in the \Windows folder.
"Cold Booting the CN50" on page 56.
CN50 Mobile Computer User's Manual