Draytek Vigor2110 Series User Manual page 58

Enable
Prefix Number
Mode
Vigor2110 Series User's Guide
Check this box to invoke this setting.
The phone number set here is used to add, strip, or replace the
OP number.
None - No action.
Add - When you choose this mode, the OP number will be
added with the prefix number for calling out through the
specific VoIP interface.
Strip - When you choose this mode, the OP number will be
deleted by the prefix number for calling out through the specific
VoIP interface. Take the above picture (Prefix Table Setup web
page) as an example, the OP number of 886 will be deleted
completely for the prefix number is set with 886.
Replace - When you choose this mode, the OP number will be
replaced by the prefix number for calling out through the
specific VoIP interface. Take the above picture (Prefix Table
Setup web page) as an example, the prefix number of 03 will be
replaced by 8863. For example: dial number of "031111111"
51