Draytek Vigor2110 Series User Manual page 121

as the Address Type.
From the IP Group drop down list, choose the one that you want to
apply. Or use the IP Object drop down list to choose the object that
you want.
Service Type Click Edit to access into the following dialog to choose a suitable
service type.
To set the service type manually, please choose User defined as the
Service Type and type them in this dialog. In addition, if you want to
use the service type from defined groups or objects, please choose
Group and Objects as the Service Type.
Protocol - Specify the protocol(s) which this filter rule will apply to.
Source/Destination Port -
(=) – when the first and last value are the same, it indicates one port;
when the first and last values are different, it indicates a range for the
port and available for this service type.
it indicates all the
(!=) – when the first and last value are the same,
ports except the port defined here; when the first and
last values
are different, it indicates that all the ports except the range defined
here are available for this service type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for this profile.
Service Group/Object - Use the drop down list to choose the one
that you want.
Vigor2110 Series User's Guide
114