Advanced Setting - Draytek Vigor2110 Series User Manual

Security
WEP
Pre-shared Key
Bridge
Repeater
Access Point Function
Status
4 . 1 3 . 7 A d v a n
4 . 1 3 . 7 A d v a n
This page allows users to set advanced settings such as operation mode, channel bandwidth,
guard interval, and aggregation MSDU for wireless data transmission.
Operation Mode
Vigor2110 Series User's Guide
c e d S e t t i n g
c e d S e t t i n g
first type of application. Repeater mode is for the second one.
There are three types for security, Disable, WEP and
Pre-shared key. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose one
of the types for the router.
Check this box to use the same key set in Security Settings
page. If you did not set any key in Security Settings page, this
check box will be dimmed.
Type 8 ~ 63 ASCII characters or 64 hexadecimal digits leading
by "0x".
If you choose Bridge as the connecting mode, please type in the
peer MAC address in these fields. Four peer MAC addresses are
allowed to be entered in this page at one time. Yet please
disable the unused link to get better performance. If you want to
invoke the peer MAC address, remember to check Enable box
in the front of the MAC address after typing.
If you choose Repeater as the connecting mode, please type in
the peer MAC address in these fields. Four peer MAC addresses
are allowed to be entered in this page at one time. Similarly, if
you want to invoke the peer MAC address, remember to check
Enable box in the front of the MAC address after typing.
Click Enable to make this router serving as an access point;
click Disable to cancel this function.
It allows user to send "hello" message to peers. Yet, it is valid
only when the peer also supports this function.
Mixed Mode – the router can transmit data with the ways
supported in both 802.11a/b/g and 802.11n standards.
However, the entire wireless transmission will be slowed
down if 802.11g or 802.11b wireless client is connected.
Green Field – to get the highest throughput, please choose
such mode. Such mode can make the data transmission
happening between 11n systems only. In addition, it does
209