Draytek Vigor2110 Series User Manual page 113

Index
Comment
Local IP Address
Status
To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 10 port ranges for diverse services.
Enable Open Ports
Comment
WAN IP
Local Computer
Choose PC
Protocol
Start Port
End Port
Indicate the relative number for the particular entry that you want to
offer service in a local host. You should click the appropriate index
number to edit or clear the corresponding entry.
Specify the name for the defined network service.
Display the private IP address of the local host offering the service.
Display the state for the corresponding entry. X or V is to represent
the Inactive or Active state.
Check to enable this entry.
Make a name for the defined network application/service.
Specify the WAN IP address that will be used for this entry. This
setting is available when WAN IP Alias is configured.
Enter the private IP address of the local host or click Choose PC to
select one.
Click this button and, subsequently, a window having a list of
private IP addresses of local hosts will automatically pop up. Select
the appropriate IP address of the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP, or -----
(none) for selection.
Specify the starting port number of the service offered by the local
host.
Specify the ending port number of the service offered by the local
host.
106
Vigor2110 Series User's Guide