Setting Up The Printer; Chapter 2: Setting Up The Printer; What Is In The Box - NCR 7156 Service Manual

7156 Service Guide

Chapter 2: Setting Up the Printer

This chapter describes some of the basic procedures for setting up the 7156 printer. See the
7156 Setup Guide or the 7156 Owner's Guide for more information about loading the paper
and installing the ribbon cassette. See the "Quick Reference" section at the front of this
manual for information about ordering these manuals.

What Is in the Box?

The following items are packed in the shipping box (printers shipped in bulk may not
include all of these items):
•
•
•
•
•
•
These items may be ordered as options from NCR and will be shipped separately:
•
•
Printer enclosed in a plastic bag and foam pack
•
Receipt paper roll (inside receipt bucket)
•
Test printout protecting the thermal printhead (inside receipt bucket)
•
Cardboard support for cantilever (on slip table)
•
Foam restraint for carriage (behind front cover)
Power supply with cable connecting to printer and power supply cord connecting to
power outlet (only if ordered with the printer)
Ribbon cassette (in box)
Installation report card (please complete this form and return to NCR)
7156 Thermal Receipt and Impact Slip Printer: Setup and User's Guide
Clips for securing cables under the base
If not in the box, the clips will be attached or molded to the base
Communication cable (from host computer to printer)
Cash drawer with cables (may be ordered from other equipment suppliers: see
"Appendix D: Ordering Paper and Supplies")
Chapter 2: Setting Up the Printer
September 1998 7