Port Settings; Protocol Settings - Xerox 4595 System Administration Manual

8. S e tu ps

Port Settings

Protocol Settings

8- 11 8
Select the interface by which the machine is connected to the
client. In Port Settings, you can set the following items:
1. LPD
2. NetWare
3. SMB
4. IPP
5. EtherTalk
6. Salutation
7 Port9100
8. SNMP
For information about port settings, refer to the following sections
in this guide:
• Services and features page 5
• Network setting items for CentreWare Internet Services page
5
• E-mail overview page 1
Select the parameters that are required for communications
between the machine and client workstations. In Protocol
Settings, you can set the following items:
1. Ethernet Settings
2. TCP/IP - Get IP Address
3. TCP/IP - IP Address
For information about port settings, refer to the following sections
in this guide:
• TCP/IP (LPD/Port 9100) page 1
• Ethernet page 6
• TCP/IP page 12
X e r o x 4 5 95 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e
9. FTP Client
10. Receive E-mail
11. Send E-mail
12. Mail Notice Service
13. UPnP Discovery
14. Internet Services
15.SOAP
4. TCP/IP - Subnet Mask
5. TCP/IP - Gateway Address
6. TCP/IP - IP Filter