Port Settings; Protocol Settings; Machine E-Mail Address/Host Name - Xerox D95 System Administration Manual

Note
More detailed settings are available when using CentreWare Internet Services.
1. From the System Settings screen, select Connectivity & Network Setup.
2. Select the item to be set or changed.

Port Settings

Select the interface by which the machine is connected to the client. In Port Settings,
you can set the following items:
LPD
NetWare
SMB
IPP
EtherTalk
Bonjour
Port9100
SNMP
FTP Client

Protocol Settings

Select the parameters required for communications between the machine and client
workstations. In Protocol Settings, you can set the following items.
Ethernet Rated Speed
TCP/IP - IP Mode
IPv4 - IP Address Resolution
IPv4 - IP Address
IPv4 - Subnet Mask
IPv4 - Gateway Address
IPv4 - DNS Server Setup
IPv4 - IP Filter

Machine E-mail Address/Host Name

Select the e-mail address and host name for this machine. In Machine E-mail
Address/Host Name, you can set the following items:
• E-mail Address
Xerox ® D95/D110/D125/D136 Copier/Printer
System Administration Guide
Send E-mail
E-mail Notification Service
UPnP Discovery
WSD
Internet Services (HTTP)
SOAP
WebDAV
IPv6 Address Manual Configuration
Manually Configured IPv6 Address
Manually Configured IPv6 Address Prefix
Manually Configured IPv6 Gateway
IPv6 - DNS Server Setup
Automatically Configured IPv6 Address
IPv6 - IP Filter
System Settings
10-45