Table of Contents
Advertisement
X10DRT-L/LIBQ/LIBF Motherboard User's Manual
Ethernet Ports
Two Gigabit Ethernet ports (LAN1 and LAN2) are located on the I/O back panel on
the motherboard. These Ethernet ports support 1GbE LANs on the motherboard.
In addition, an IPMI-dedicated LAN is located above USB 0/1 ports on the back
panel. All of these ports accept RJ45 cables. Please refer to the LED Indicator
section for LAN LED information.
InfiniBand Connector (Optional for X10DRT-LIBF/LIBQ)
An optional InfiniBand connector with FDR/QDR support is located on the I/O back
panel on the X10DRT-LIBF/LIBQ. This connector provides data interconnectivity
within the same computer and among different computers. It is used in High-
Performance Computing (HPC) platforms featuring very high throughput with very
low latency. See the layout below for the location.
X10DRT-L
Rev. 1.00
IPMI CODE
1. GLAN1
2. GLAN2
3. IPMI LAN
4. InfiniBand Connector (Op-
tional for X10DRT-LIBF/LIBQ)
3
2-20
1
2
4
Advertisement
Table of Contents
