Operator Interface Options; Digital Operator Copy Unit - Hitachi SJ200 Series Instruction Manual

1–3
SJ200 Inverter

Operator Interface Options

The SJ200 inverter has a removable keypad, as
shown to the right (part no. OPE–SRmini).
This allows the keypad to operate the inverter
remotely, as shown (below, left). A cable (part
no. ICS–1 or ICS–3, 1m or 3m) connects the
modular connectors of the keypad and inverter.
Hitachi provides a panel mount keypad kit
(below, right). It includes the mounting flange,
gasket, keypad, and other hardware. You can
OPE–SRmini
mount the keypad with the potentiometer for a
NEMA1 rated installation. The kit also provides for removing the potentiometer knob to
meet NEMA 4X requirements, as shown (part no. 4X–KITmini).
Cable
ICS–1 or
ICS–3
4X–KITmini
Digital Operator Copy Unit - The optional
digital operator / copy unit (part no. SRW-0EX)
is shown to the right. It has a 2-line display that
shows parameters by function code and by name.
It has the additional capability of reading
(uploading) the parameter settings in the inverter
into its memory. Then you can connect the copy
unit on another inverter and write (download) the
parameter settings into that inverter. OEMs will
find this unit particularly useful, as one can use a
single copy unit to transfer parameter settings
from one inverter to many.
Other digital operator interfaces may be available
from your Hitachi distributor for particular indus-
tries or international markets. Contact your
Hitachi distributor for further details.
SRW–0EX