Current Draw And Thermal Dissipation Specifications - Lab.gruppen PLM series Operation Manual

Appendix
9.3.2 Input and Router Defaults
Autoselect:
Input sensitivity:
Dante:
AES3:
Iso-Float:
Router 1:
Router 2:
9.3.3 Amplifier Defaults
Attenuation:
Polarity:
Mutes:
Load Model:
9.4

Current Draw and Thermal Dissipation Specifications

The tables in this section provide measured current consumption and calculated heat dissipation for five
different operating conditions for each PLM Series device.
1. Standby Mode
2. Power On (Idle - No Signal)
3. Power On (Normal Operation - Pink Noise 1/8 of Rated Power)
4. Power On (Heavy Duty Operation - Pink Noise Max Power)
5. Power On (20 kHz Sine Wave)
74
PLM Series Operation Manual rev 1.1.9
On
+26 dBu
Disabled
Terminated
Enabled
AES1 (Ch.1) as Priority 1, Analog 1 as Priority 4
AES1 (Ch.2) as Priority 1, Analog 2 as Priority 4
0 dB
Positive (In phase)
Unmuted
No Load Model