Lab.gruppen PLM series Operation Manual page 63

7.11.6 Front Panel Display Controls
MENU > FRAME > FRONT
Contrast
To adjust the front panel LCD contrast, select this option then use the rotary encoder to change the value.
Dimming
To adjust the front panel LCD brightness, select this option then use the rotary encoder to change the value.
Channel Order
To adjust the order in which both inputs and outputs are displayed on the front panel in all views, select this
option then use the rotary encoder to change the value between TOP-DOWN (default) and BOTTOM-UP.
7.11.7 Frame Preset Menu
MENU > FRAME PRST
Figure 7-17: Front Panel Display Controls Menu
Figure 7-18: Frame Preset Menu
Front Panel Interface
PLM Series Operation Manual rev 1.1.9
57