8.4.1
Primary Network Connection
The Primary Network connection is used for Lake Controller connectivity and Dante digital audio. Please
refer to section 4.2 for additional information.
8.4.2
Secondary Network Connection
The Secondary Network connection may be used for a redundant Dante digital audio network. Please refer
to section 4.2 for additional information.
8.5
Power Inlet
8.5.1
Power Connector
A Neutrik NAC3 Series powerCON connector rated at 32 A is fitted to the rear of the PLM for AC mains
input. The power cable (AC cord) supplied with the PLM has the mating connector ready-fitted, but may
require a mains (AC) plug specific to your country to be fitted to the other end. The wiring an pinout details
are shown in Table 8-4.
powerCON
230 V
Pin
Version
Brown
L
Blue
N
Green/Yellow
Table 8-4: powerCON Connector Wiring and Pinout
Back Panel Interface
115 V
Version
Black
White
Green
PLM Series Operation Manual rev 1.1.9
69