Power Inlet - Lab.gruppen PLM 20K44 Operation Manual

8.5. Power Inlet

8.5.1 Power Connector
A Neutrik NAC3 Series powerCON connector rated at 32 A is fitted to the rear of the PLM+ for AC mains input.
The power cable (AC cord) supplied with the PLM+ has the mating connector ready-fitted, but may require a mains
(AC) plug specific to your country to be fitted to the other end. The wiring an pinout details are shown in Table 8.2.
powerCON pin 230 V Cable
L
N
Green/Yellow
Table 8.16: powerCON Connector Wiring and Pinout
115 V Cable
Brown Black
Blue White
Green
8. Back Panel Interface
PLM+ SERIES Operation Manual rev 3.0.1
67