Connecting The Ups To Utility Power: 230Va Model - Compaq Pro UPS 500 Operation And Reference Manual

IMPORTANT: When the UPS is connected to utility power, all receptacles will
immediately be energized regardless of the UPS operating mode selected (using the UPS
ON/STANDBY button).
IMPORTANT: If any of the indicators on the front panel are red (indicating an alarm
condition), press the TEST/ALARM RESET button to clear the red indicators. If this does
not clear the red indicators, see Chapter 6, "Troubleshooting."
IMPORTANT: If the UPS does not include a power cord that is suitable for the application,
contact an authorized Compaq service representative to obtain the appropriate power
cord.
For more information on the front panel indicators and controls, see Chapter 3,
"Operation."
Connecting the UPS to Utility Power:
230VA Model
WARNING: To reduce the risk of personal injury resulting from electric shock or
to avoid damage to the equipment:
I
Plug the input line cord into a grounded (earthed) electrical outlet that is
installed near the equipment and is easily accessible.
I
Do not disable the grounding plug on the input line cord. The grounding
plug is an important safety feature.
I
Do not use an extension cord.
CAUTION: Some motor-powered AC generators have voltage and frequency
outputs that can fluctuate beyond nominal accepted ranges and can cause
damage to the UPS if connected to the generator output. Consult the generator
manufacturer before connecting the UPS to a generator.
Installation 2-11