Connecting The Ups To Utility Power; Connecting Devices To The Ups - Compaq T2200 XR Operation And Reference Manual

Connecting the UPS to Utility Power

Connect the UPS to a grounded utility power outlet.
WARNING: To reduce the risk of electric shock or damage to the equipment,
take these precautions:

Connecting Devices to the UPS

Before connecting devices, verify that the UPS will not overload by making
sure that the rating of the devices do not exceed the capacity of the UPS.
Evenly distribute connected devices throughout all load segments. Do not
exceed the rating of individual receptacles; connect according to shutdown
preference.
After verifying that the UPS will not overload, connect the power cords from
the devices to the appropriate output receptacles of the UPS.
WARNING: Risk of personal injury from electric shock. The UPS T2200 XR H NA
and T2200 XR H INT'L models are not suitable for installation where the total
Earth (ground) conductor leakage current for all connected devices exceeds
3.5 mA.
CAUTION: Do not plug laser printers into the UPS. The instantaneous current
drawn by this type of printer may overload the UPS.
Plug the input line cord into a grounded (earthed) electrical outlet that is
installed near the equipment and is easily accessible.
Do not disable the grounding plug on the input line cord. The grounding
plug is an important safety feature.
Do not use extension cords.
Installation 2-7