Compaq Pro UPS 500 Operation And Reference Manual page 30

After connecting the UPS to utility power, check the front panel indicators.
The green LINE STATUS indicator (
(ON mode) or flashing (STANDBY mode), indicates the UPS mode of
operation.
1
Figure 2-7. The LINE STATUS indicator (
IMPORTANT: When the UPS is connected to utility power, all receptacles will
immediately be energized regardless of the UPS operating mode selected (using the UPS
ON/STANDBY button).
IMPORTANT: If any of the indicators on the front panel are red (indicating an alarm
condition), press the TEST/ALARM RESET button to clear the red indicators. If this does
not clear the red indicators, see Chapter 6, "Troubleshooting."
NOTE: If the UPS does not include a power cord that is suitable for the application,
contact an authorized Compaq service representative to obtain the appropriate power
cord.
For more information on the front panel indicators and controls, see Chapter 3,
"Operation."
) , either illuminated constantly


)


Installation 2-13