Connecting The Ups Phone/Fax Surge Protector - Compaq Pro UPS 500 Operation And Reference Manual

Connecting the UPS Phone/Fax Surge Protector

Select Compaq Pro UPS 500 models include a Phone/Fax Surge Protector that
allows the UPS to protect a communications device from surges on a single
phone line.
Connect a phone cord (user supplied) from the wall outlet to the UPS
connection labeled "IN" (
the UPS connection labeled "OUT" (
NOTE: Phone/Fax Surge Protector connection is optional. The UPS will function properly
without this connection.
Figure 2-2. Connecting the UPS Phone/Fax Surge Protector
) . Connect a phone cord from your equipment to


CAUTION: To avoid damage to the equipment, connect the Phone/Fax Surge
Protector with an analog phone line or network only—not with a digital PBX.
) .

1 2
Installation 2-5