Installation Requirements; Items Supplied With The Ups Kit - Compaq Pro UPS 500 Operation And Reference Manual

2-2 Compaq Pro UPS 500 Operation and Reference Guide

Installation Requirements

Items Supplied with the UPS Kit

The UPS kit should contain the following components:
Software/Reference Material
The Compaq Power Manager Pro UPS Software and Documentation CD
I
containing the:
Compaq Power Manager Pro UPS software
Compaq Pro UPS 500 Operation and Reference Guide
The Software Installation Instructions (insert included with the Compaq
I
Power Manager Pro UPS software CD) containing information on the
installation requirements for Compaq Power Manager Pro UPS software
Important Safety Information guide (included with the UPS kit) to be
I
reviewed before installing this product
Hardware
The UPS ships with one or more of the following:
The 120VA and 100VA models ship with a non-detachable input power
I
cord with a NEMA 5-15 plug, and an RS-232 UPS/computer interface
cable, Compaq part number 159074-001.
The 230VA model ships with an IEC-320 jumper cord (for load
I
equipment power), and an RS-232 UPS/computer interface cable,
Compaq part number 159074-001.
Compaq Pro UPS 500 models ship with an RS-232 UPS/computer interface
cable. The computer interface cable is not needed for normal operation. If
power management of the UPS is desired, connect the interface cable between
the UPS communications port and the serial port on the host computer.
IMPORTANT: If the UPS does not include a power cord that is suitable for the application,
contact an authorized Compaq service representative to obtain the appropriate power
cord. Please refer to the "Precautions for Power Products" section of the Important Safety
Information guide (included with the UPS kit).