System Requirements
Compaq Power Management (CPM) software requires the following hardware
and software:
I
Compaq Insight Manager (installed on the management workstation)
I
A communications cable (included with the Compaq UPS kit)
I
A dedicated RS-232 comm port (for UPS communications)
Installation of Compaq Power Management software requires the following
steps:
1. Installation of the CPM software Console on the Compaq Insight
Manager management workstation.
2. Installation of Compaq Insight Manager Agents on all network servers.
3. Installation of the CPM software Agent on all network servers and
workstations connected to a Compaq UPS. Compaq Power Management
software Agents are available for the following operating systems:
G
Microsoft Windows NT 4.0 and Windows 2000
G
OS/2, 3.x and later
G
SCO UNIXWare 7.1x
G
SCO OpenServer 5.04 and later
G
Novell NetWare 3.12 and later
2
Chapter
Installation