PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST on page 14. Note: Some small parts may have been
preattached. If a part is not in the parts bag, check to see if it has been preattached.
M6 x 38mm Bolt (44)
M6 x 16mm Screw (34)
M10 Washer (36)
M4 x 16mm Self-tapping
M6 x 38mm Screw (35)
Screw (37)
M10 x 55mm Bolt (32)
M6 Washer (39)
M10 x 70mm Bolt (43)
M4 Washer (42)
M10 x 80mm Bolt (30)
M10 x 83mm Bolt Set (33)
M10 x 95mm Bolt (28)
M10 x 148mm Bolt (31)
5