PART IDENTIFICATION CHART
Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in the hard-
ware kit, check to see whether it has been preattached.
M8 Locknut
M8 Washer
(42)–9
(41)–11
M8 x 25mm
Washer (40)–2
M8 x 35mm Washer (35)–6
M6 x 15mm
M8 x 15mm
M8 x 55mm Screw
Screw (47)–2
Screw (48)–8
(45)–8
M8 x 100mm Screw (46)–3
6